Chemical & Acid Hose... A foot or a Mile!

ANHYDROUS AMMONIA TRANSFER HOSE

Application: High-pressure hose for conveying anhydrous ammonia from delivery trucks to dispensing tanks.

Construction: Special ammonia resistant tubes with synthetic braid reinforcement for maximum safety. Minimum burst, 1 750 lbs. Oil and weather-resistant, pin-pricked black cover. I.D. (in.): 1/2, 3/4, 1, 1-1/4.

ANHYDROUS BULK LOADING HOSE

Application: Transferring anhydrous ammonia from bulk storage tanks at delivery depots to tank trucks.

Construction: Special ammonia-resistant tube. Reinforced with synthetic braided nylon cord for maximum safety under high pressure Minimum burst 1 750 lbs. Oil and weather-resistant. Pin-pricked cover. I.D. (in.): 1-1/2' to 3.

ACID SUCTION HOSE

HYPALON TUBE

PURE GUM TUBE

Application: For conveying acids and alkalis in suction or discharge service.

Construction: 3/16" or '1/4 pure gum tube for handling most alkalis and inorganic acids. 3/16"Hypalon tube for handling corrosive materials such as sulphuric and nitric acid. Reinforced with helix or spring-steel wire. Abrasion-resistant black rubber cover. l.D. (In.): 1- to 3.

CHEMICAL TRANSFER HOSE

Application: An economical, versatile chemical transfer hose for use at docks, terminals, and on transfer trucks. At normal storage temperatures. up to 90% of all known chemicals. plus: solvents, acids, alkalis, oils, fuels, and hydraulic fluids can be safely handled.

Construction: Special cross-linked polyethylene or viton tube reinforced with two plies of braided synthetic fiber and a helix of spring wire. Tough, abrasion and chemical resistant cover. I.D. (in.): 1 -1/2 to 4.

ACID DISCHARGE HOSE

HYPALON TUBE

PURE GUM TUBE

Application: Used to convey a wide range of acids and alkali solutions under pressure.

Construction: 3/16" or 1/4" gauge pure gum tube for most salts, alkalies, and inorganic solutions Hypalon tube for highly corrosive materials such as concentrated sulphuric, nitric and chromic acid. Reinforced with multiple plies ot synthetic duck. Abrasion resistant black rubber cover. Straight capped ends. I.D. (in.): 3/4 to 4.

If it's made of rubber, we have it... if we don't, we'll make it!

US Rubber Supply Co. USA

238-A N. 9th Street, Brooklyn, New York 11211

Brooklyn • 718.782.7888 • Fax: 718.782.8788

Email: info@usrubbersupply.com • www.usrubberco.com